Clutch - Honda CBR 250R Manual

CLUTCH

Clutch adjustment may be required if the
vehicle stalls when shifting into gear or
tends to creep; or if the
acceleration to lag behind engine speed.
Minor adjustments can be made with the
"Clutch Cable Adjuster" (2) at the "Clutch
Lever" (1).
Normal clutch lever free play is:
10 -20 mm(0.4 -0.8 in)
(1) Clutch Lever
1. Pull back the "Rubber Dust Cover" (3).
2. Loosen the "Lock Nut" (4) and turn the
clutch cable adjuster. Tighten the lock
nut and check the adjustment.
Honda Motorcycle & Scooter India Pvt. Ltd.
clutch slips, causing
(1)
3. If the adjuster is threaded out near its
limit or if the correct free play cannot be
obtained, using
adjuster, loosen the locknut and turn
in the clutch cable adjuster completely.
Tighten the lock nut and install the
rubber dust cover.
(2)
(2) Clutch Cable Adjuster
(3) Rubber Dust Cover
(4) Lock Nut
(A) Increase Free Play
(B) Decrease Free Play
4. Loosen the "Lock Nut" (5) at the lower end
of the cable. Turn the "Adjusting Nut" (6)
the clutch
(4)
(B)
(A)
CBR 250R
cable
(3)
21