Features; (Not Required For Operation) Steering Lock; Seat - Honda CBR 250R Manual

FEATURES

(Not required for operation)
STEERING LOCK
To lock the steering, turn the handlebar
all the way to the left, turn the "Ignition
Key"(1) to LOCK while pushing in. Remove
the key. To unlock the steering, turn the
key to OFF.
Do not turn the key to LOCK while
vehicle; loss of vehicle control will
(1) Ignition Key
(A) Push in
(B) Turn to LOCK
(C) Turn to OFF
34
CBR 250R
riding the
result.
(1)

SEAT

Rear seat
To remove the "Rear Seat" (1), insert the
"Ignition Key" (2) into the "Seat Lock" (3). Turn
it clockwise, then pull the rear seat up and back.
To install the rear seat, insert the "Prongs"(4)
into the "Rear Stays" (5) on the frame, and
then push down on the rear of the rear seat.
Be sure the seat is locked securely in
position after installation.
(4)
(3)
(2)
(1) Rear Seat
(2) Ignition Key
(3) Seat Lock
(4) Prongs
(5) Rear Stays
Honda Motorcycle & Scooter India Pvt. Ltd.
(1)
(5)