Operation; Pre-Ride Inspection; Starting The Engine - Honda CBR 250R Manual

OPERATION

PRE-RIDE INSPECTION

For your safety, it is very important to take
a few moments before each ride to walk
around your vehicle and
If you detect any problem, be sure you
take care of it, or have it corrected by your
Honda dealer.
WARNING
!
Improperly maintaining
failing to correct a problem before
can cause a crash in which you can be
seriously hurt or killed.
Always perform a pre-ride inspection
before every ride
problems.
1. Engine oil level - add engine oil if
required (page 27). Check for leaks.
2. Fuel level - fill fuel tank when necessary
(page 24). Check for leaks.
38
CBR 250R
check its condition.
this vehicle or
riding
and correct any
3. Coolant level - add coolant if required
(page 22). Check of leaks.
4. Front and rear brakes - check operation;
make sure there is no brake fluid
leakage (pages 19-20).
5. Tyres - check condition and pressure
(pages 28-30).
6. Drive chain - check condition and slack
(page 56). Adjust and lubricate if
necessary.
7. Throttle - check for smooth opening and
full closing in all steering positions
(page 53).
8. Clutch - check operation, and adjust if
necessary (pages 21-22).
9. Lights and horn - check that turn signals,
indicators and horn function properly.
10. Engine stop switch - check for proper
function (page 32).

STARTING THE ENGINE

Always follow the proper starting procedure
described below.
To protect the catalytic converter in your
vehicle's exhaust system, avoid extending
idling and the use of leaded petrol.
Honda Motorcycle & Scooter India Pvt. Ltd.