Main Fuse - Honda CBR 250R Manual

Fuse Box:
(CBR250RJ)
The fuse box is located under the front seat.
The specified fuses are: 10 A
1. Turn the ignition switch OFF before
checking or replacing the fuses to
prevent an accidental short-circuit.
2. Remove the
(pages 34-35).
3. Open the "Fuse Box Cover" (1).
4. Pull out the old fuse and install a new
fuse. The "Spare Fuse" (2) is located in the
fuse box.
5. Close the fuse box cover and install the
seats.
(2)
(1) Fuse Box Cover
(2) Spare Fuses
Honda Motorcycle & Scooter India Pvt. Ltd.
rear and front
(1)

Main Fuse:

The "Main Fuse" (1) is located on the starter
magnetic switch near the battery.
The specified fuse is: 30 A
1. Turn the ignition switch OFF before
checking or replacing the fuse to prevent
an accidental short-circuit.
2. Remove the rear and front seats (pages
seats
34-35).
3. Disconnect the "Wire Connector" (2) of
the starter magnetic switch.
4. Pull out the old fuse and install a new
fuse. The "Spare Main Fuse" (3) is
attached to the battery cover.
5. Reconnect the connector.
6. Install the remaining parts in the reverse
order of removal.
(1)
(3)
(1) Main Fuse
(2) Wire Connector
(3) Spare Main Fuse
(2)
69
CBR 250R