Honda CBR 250R Manual page 19

(Ref.No.) Description
5. Right Turn Signal
Indicator (green)
6. High Beam Indicator
(blue)
7. RESET Button
8. MODE Button
9. PGM-FI Malfunction
Indicator Lamp (MIL)
(amber)
10. Left Turn Signal Indicator Flashes when the left turn signal operates.
(green)
11. Anti-lock Brake System
(ABS) Indicator
(CBR250RAJ)
(amber)
Honda Motorcycle & Scooter India Pvt. Ltd.
Flashes when the right turn signal operates.
Lights when the headlight is on high beam.
This button is used to reset the tripmeter (page 15) or to
set the digital clock (page 17).
This button is used to select the odometer and tripmeter
(page 15) or to set the digital clock (page 17).
Lights when there is any abnormality in the PGM-FI
(Programmed Fuel Injection) system Should also light for a
few seconds and then go off when the ignition switch is
turned ON.
If it comes on at any other time, reduce speed and take the
vehicle to your Honda dealer as soon as possible.
This indicator normally comes on when the ignition switch is
turned ON, and goes off after you ride the vehicle at
speed above 10 km/h (6 mph). If there is a problem with
the Anti-lock Brake System, this indicator flashes and
remains on (page 11).
Function
13
CBR 250R