Removal From Storage - Honda CBR 250R Manual

WARNING
!
Petrol is highly flammable and explosive.
You can be burned or seriously injured
when handling fuel.
• Stop the engine and keep heat, sparks,
and flame away.
• Refuel only outdoors.
• Wipe up spills immediately.
4. To prevent rusting in the cylinder,
perform the following:
• Remove the spark plug cap from
the spark plug. Using tape or string,
secure the cap to any convenient
plastic body part so that it is
positioned away from the spark plug.
• Remove the spark plug from the
engine and store it in a safe place.
Do not connect the spark plug to the
spark plug cap.
• Pour a table spoon (15-20 cm
clean engine oil into the cylinder and
cover the spark plug hole with a
piece of cloth.
• Crank the engine several times to
distribute the oil.
• Reinstall the spark plug and spark
plug cap.
Honda Motorcycle & Scooter India Pvt. Ltd.
5. Remove the battery. Store in an area
protected
and direct sunlight.
6. Wash and dry the vehicle. Wax all
painted surfaces. Coat chrome with rust
inhibiting oil.
7. Lubricate the drive chain (page 59).
8. Inflate the tyres to their recommended
pressures. Place the vehicle on blocks to
raise both tyres off the ground.
9. Cover the vehicle (don't use plastic
or other coated materials) and store in
an unheated area, free of dampness
with a minimum of daily temperature
variation. Do not store the vehicle
in direct sunlight.

REMOVAL FROM STORAGE

1. Uncover and clean the vehicle.
2. Change the engine oil if more than 4 months
have passed since the start of storage.
) of
3
3. Drain any excess aerosol rust-inhibiting
oil from the fuel tank. Fill the fuel tank
with fresh petrol.
4. Perform all Pre-ride Inspection checks
(page 38).
Test ride the vehicle at
riding area away from traffic.
from freezing temperatures
low speeds in a safe
CBR 250R
75