Connecting With Hd-Sdi Equipment; Connecting With Component/Video Gbr Equipment - Sony SRX-T105 Operating Instructions Manual

Note
Select "RGB" in "Signal Mode" of "Input Source" in the
PICTURE CONTROL window.
For details, see page 27.

Connecting with HD-SDI Equipment

Attach the optional LKRI-002 HD-SDI (4:2:2) or LKRI-
003 HD-SDI (4:4:4) input board to the input board
attachment part, and connect the HDCAM recorder/player.
The illustration below shows an example with the LKRI-
002 attached on INPUT B.
Left side
INTER LOCK ETHERNET
RS232C
HDCAM recorder/player, etc.
Note
When the LKRI-003 is attached to the projector, select the
type of signal with "Signal Mode" of "Input Source" in the
PICTURE CONTROL window. For Single-link input,
select "YPbPr" or "YPbPr FULL". For Dual-link input,
select "RGB" or "RGB FULL".
For details, see page 27.
DVI-D AUX
IN OUT
IN connector
HD-SDI connecting cable
(not supplied)
to HD-SDI output
SRW-5000
HD DIGITAL VIDEO CASSETTE RECORDER
Connecting with Component/Video
GBR Equipment
Attach the optional LKRI-001 analog input board to the
input board attachment part on the projector, and connect
with a DVD recorder/player or analog video equipment
equipped with the component output, or an high-definition
equipment equipped with a video GBR connector.
Left side
INTER LOCK ETHERNET RS232C
Betacam, DVD recorder/player, etc.
Note
When connecting to the output of HD component
equipment, set "Signal Mode" of "Input Source" in the
PICTURE CONTROL window to "YPbPr", and when
connecting to the output of HD video GBR equipment, set
to "RGB".
For details, see page 27.
DVI-D AUX
R(P r /C r ) G(Y/Y) B(P b /C b ) HD VD
IN OUT
IN OUT
R/P / G/Y / B/P
r b
connectors
Component cable, etc
(not supplied)
to component output/
video GBR
Connecting the Projector
21