Connecting A Computer For Controlling The Projector; Connecting The Computer Via The Ethernet - Sony SRX-T105 Operating Instructions Manual

Installation of the SRX Controller is completed.
To restart the SRX Controller immediately after
installation has been completed, click to check
"Launch SRX Controller for SRX-T series", then click
"Finish".
The icon is displayed in the desktop window.
Connecting a Computer
for Controlling the
Projector
Connect a computer for controlling the projector to the
projector via the ETHERNET connector or the RS232C
connector.
Connecting the Computer via the
Ethernet
Connect the computer to the projector using the supplied
ethernet cable (cross cable).
Note
Set the TCP/IP protocol of the connected computer to
DHCP.
INTER LOCK ETHERNET RS232C
ETHERNET connector
Ethernet cable (cross cable)
(supplied)
Ethernet connector

Connecting a Computer for Controlling the Projector

DVI-D AUX
Computer
17