Dust Extraction; Adapter For External Dust Extraction Systems (With Reducer); Use - Parkside PDS 290 C3 Translation Of The Original Instructions

Dust extraction

WARNING! RISK OF FIRE!
► When working with electrical appliances
which can be connected to a vacuum cleaner
via a vacuum cleaner adapter, there is a risk
of fire! Under unfavourable conditions, wood
dust in the bag of the vacuum cleaner can
spontaneously ignite . This can occur due to
flying sparks or when sanding over residual
metals in wood . This is particularly likely if
the wood dust is mixed with paint residues
or other chemicals and the workpiece has
become hot after being used for a long time .
Therefore, do not allow the material being
sanded and the appliance to overheat .
Always empty the vacuum cleaner dust bag
before taking work breaks .
Wear a dust mask!
WARNING!
► Always remove the plug from the mains
power socket before carrying out any
work on the appliance .
Adapter for external dust extraction
systems (with reducer)
Connection:
♦ Push the adapter
connection . When doing so, note the guid-
ance aids on the appliance and on the adapter .
♦ To lock, turn the extraction nozzle
♦ If necessary, use the reducer
onto the adapter
♦ Push the hose of a suitable dust extraction ap-
pliance (e .g . a workshop vacuum cleaner) onto
the adapter for vacuum extraction or the
reducer .
■ 6 │ GB │ IE │ NI │ CY
for dust extraction into the
clockwise .
by pushing it
.
Removal:
♦ Pull the hose of the vacuum cleaner off the
adapter for vacuum extraction
To unlock, turn the extraction nozzle
clockwise .
♦ Pull the adapter
(including the reducer

Use

CAUTION!
► Ensure that the appliance is switched off
before connecting it to the mains .
NOTE
► Always switch on the delta sander before
making contact with the material, then apply
it to the workpiece .
Switching the appliance on:
♦ Push the ON/OFF switch
tion "I" .
Switching the appliance off:
♦ Push the ON/OFF switch
position "0" .
Selecting oscillation speed:
♦ You can set the desired oscillation speed using
the speed adjustment wheel
The setting can also be changed while working .
Work out the optimum oscillation for your work
by carrying out a practice run .
Setting 1 = lowest oscillation speed / Setting
max . = highest oscillation speed
.
anti-
for vacuum extraction
if fitted) off .
forwards to posi-
backwards to
as required .
PDS 290 C3