10. Maintenance
On the maintenance screen, you can reset the consumption degree, or can specify backup/restore and
pausing of warning occurrence/warning signal output during maintenance. In addition, you can check the
maintenance log.
1) Start preventive maintenance.
2) Click [Maintenance] to expand the menu; the maintenance functions are displayed.
3) Click [Warning Pause], [Maintenance Reset], [Backup], or [Maintenance Log], to switch the
main screen.
Maintenance
1) Warning Pause
2) Maintenance Reset : Resets (clears) the accumulation data related to consumption degree.
3) Backup
4) Maintenance Log
Maintenance 54
Example: Maintenance Reset screen
(1) Warning Pause
(2) Maintenance Reset
(3) Backup
(4) Maintenance Log
: Displays the warning occurred/list of warning signals being output.
Specify pausing of notifications (alarm, dedicated output signal).
: Performs backup/restore when migrating the preventive maintenance data to
a different controller.
: Displays the maintenance log recorded during executing maintenance reset.