Dashboard Electric Wiring Diagram; Check H20 Temperature Indicator - APRILIA RSV Mille 1000 1999 Technical Training Course

Aprilia Consumer Service Spa
Technical Service and Training
Release 4 july 99

DASHBOARD ELECTRIC WIRING DIAGRAM:

LEGENDA:
D=15 AMP FUSE
53= FUEL WARNING LIGHT SENSOR
54= OIL PRESSURE SWITCH
55= WATER TEMP. THERMISTOR
56= SPEED SENSOR
57= FUEL WARNING LIGHT
61= OIL PRESSURE WARNING LIGHT
64= REV COUNTER
65= MULTIFUNCTION DISPLAY
66= SPEEDOMETER
66
D

CHECK H20 TEMPERATURE INDICATOR

DISCONNECT THE THERMISTOR CONNECTOR
Connect the following resistors to the connector and check the display reading:
COLD: R=3000 ohm
60 Degrees (err10%) with R= 580 ohm
90 Degrees (err10%) with R= 245 ohm
If the readings are correct, check the thermistor in the same way as described for the H2O thermistor
This material is didactic and
may be changed following the technical
development of the product
64
56
57
65
53 55
61
54