Multifunction - APRILIA RSV Mille 1000 1999 Technical Training Course

Aprilia Consumer Service Spa
Technical Service and Training
Release 4 july 99

6. MULTIFUNCTION

Coolant temperature and clock => [D] =>
Battery voltage => [D] =>
Set hours (Press LAP) =>
Set minutes (Press LAP) =>
Set °C/°F (Press LAP) => go back to
b) Stop watch
Press and hold [LAP] and then (within 0.7 seconds) press key [D] to start the stop watch.
b. 1) Press [LAP] ==> stop watch starts (the [LAP] key is not enabled for 10 sec.)
b.2) Starting from timing =:> press [B] => display shows first acquired time => press [LAP] to
re-display times in sequence
-Press [B] to go back to timing
-Press [A] + [LAP] for 2 seconds to zero memories
b.3) To exit timing press [D] and then [LAP] (temperature and clock will appear on display).
6. Switch off SERVICE => press [LAP] and [R] for 5 seconds.
This material is didactic and
may be changed following the technical
development of the product