Injectors - APRILIA RSV Mille 1000 1999 Technical Training Course

Aprilia Consumer Service Spa
Technical Service and Training
Release 4 july 99

INJECTORS:

Each cylinder has an injector. The location in the throttle assembly is shown in the figure:
The injector used is made up of the following components:
Mesh filter
1.
Compression spring
2.
3. Valve shaft
Injector coil
4.
Injector jet
5.
SIGNAL
CONTROL
CIRCUIT
TRANSISTOR
+ VCC BATTERY
This material is didactic and
may be changed following the technical
development of the product
FUEL