Scan Properties - Argox AR-3201 User Manual

3.2 Scan properties

￭
Good-read off
After you pull the trigger, your scanner will keep
emitting the light bar, until it captures a good
scan or no bar code is decoded after the stand-by
duration elapsed.
￭ Momentary
When you pull the trigger, the light bar is turned
on; when you release the trigger, the light bar is
turned off.
￭ Alternate
The trigger acts as a toggle. When you pull the
trigger, the light bar is turned on; when you pull
it again, the light bar is turned off.
￭
Timeout-off
When you pull the trigger, the light bar is turned
on. If no bar code is decoded after the stand-by
duration elapsed, the light bar is turned off.
￭
Continue
It automatically detects and decodes bar codes in
your scanner's field of view. You can turn on this
mode when you want to decode bar codes
without pulling the trigger. If no bar code is
decoded after the stand-by duration elapsed, the
light bar will flash. You can move your scanner
or pull the trigger to wake it up.
￭ Test only
It is reserved for engineers to test.
￭
Auto-sensing
Similar to Continue, it automatically detects and
decodes bar codes in your scanner's field of view.
If no bar code is decoded after the stand-by
duration elapsed, the light bar will be turned off.
32