Reset Your Scanner - Argox AR-3201 User Manual

3.7 Reset your scanner

By resetting your scanner, you can return your
scanner to the state it was in when you receive
it. This can help you solve some problems
caused by settings changed between scans.
Scan the following bar code to reset your
scanner and cradle:
There are two ways to reset your scanner.
￭ Scan the bar code
Scan the following bar code to reset your
scanner.
￭ Press and hold the RESET button
Press and hold the RESET button until you
hear the startup sound.
Remember the following when resetting your
scanner:
1.
2.
If your scanner is connected to your
cradle, when you scan the Reset scanner
bar code or press the RESET button, you
reset both of your scanner and cradle.
If your scanner is not connected to your
cradle, when you scan the Reset scanner
bar code, you only reset your scanner;
when you press the RESET button, you
only reset your cradle.
53