Virtual Com - Argox AR-3201 User Manual

Virtual COM

You can configure Virtual COM to transmit
data to a computer via a virtual COM port.
After installing Virtual COM, your scanner
will be assigned a virtual COM port, which
you can use to receive or send data.
To configure Virtual COM on Windows XP
and set up a virtual COM port in Scan Utility:
1. Connect your scanner to your computer.
2. Use the bar code in Interface Selection to
3. In the Found New Hardware Wizard
4. Click Search for the best driver in these
5. After the driver installed, click Finish.
6. Right-click My Computer and click
7. Click the Hardware tab, and click
switch the interface to Virtual COM. If
the interface is set successful, you'll hear
a long beep, and Found New Hardware
Wizard will appear on screen.
dialog box, click Install from a list or
specific location (Advanced), and click
Next.
locations, and select the Include this
location in the search check box. Next,
click Browse, and find the driver at your
installation path of Scan Utility (default is
C:\Program Files\Argox\Scan
Utility\driver\virtual com), and then click
Next.
Properties.
Device Manager.
80