Table of Contents
Advertisement
76
7.8
Assembling the control panel
To protect it during transport, the control panel is packaged
separately and must be assembled to the bracket prior to
commissioning.
The 3 screws required for this purpose have been included.
Fig. 53: Assembling the control panel
①
②
(1) - Bracket
(2) - Control Panel
To assemble the control panel:
1.
Place the control panel (2) onto the bracket (1), making sure
not to kink the cable (3).
2.
Tighten the control panel (2) to the bracket (1) using the
3 screws (4).
(3) - Cable
(4) - Screw
Operating Instructions 195 - 01.0 - 11/2017
Setup
④
③
Advertisement
Table of Contents
