Table of Contents
Advertisement
74
7.6
Assembling the knee button
Depending on its equipment, the machine may be equipped with
an electronic knee button.
Fig. 50: Assembling the knee button (1)
①
②
(1) - Knee button
(2) - Connecting cable
To assemble the electric knee button:
1.
Screw the knee button (1) in place on the left next to the control
and, if applicable, next to the sewing lamp transformer in front
of the oil pan under the tabletop.
2.
Feed the connecting cable (2) in front of the oil pan to the
control towards the rear.
3.
Insert the plug (3) of the connecting cable (2) into the socket
of the control.
Fig. 51: Assembling the knee button (2)
(3) - Plug
Operating Instructions 195 - 01.0 - 11/2017
Setup
③
Advertisement
Table of Contents
