Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. PIXMA MX426
  6. Getting started

Canon PIXMA MX426 Getting Started

Hide thumbs

Advertisement

Quick Links

Getting Started

入門指南
입문 가이드
คำแนะนำเริ ่ ม ต้ น
Make sure to read this manual before using the machine. Please keep it in hand for future reference.
確保在使用本機之前閱讀本手冊。請妥善保管以便日後使用。
기기를 사용하기 전에 이 설명서를 읽도록 하십시오. 나중에 참고할 수 있도록 이를 가까운 곳에 보관해 두십시오.
กรุ ณ าอ่ า นคู ่ ม ื อ นี ้ ก ่ อ นใช้ ง านเครื ่ อ ง และเก็ บ รั ก ษาคู ่ ม ื อ ไว้ เ พื ่ อ การอ้ า งอิ ง ในภายหน้ า
ENGLISH
繁體中文
한국어
ภาษาไทย

Advertisement

loading

Related Manuals for Canon PIXMA MX426

Summary of Contents for Canon PIXMA MX426

  • Page 1: Getting Started

    ENGLISH 繁體中文 한국어 ภาษาไทย Getting Started 入門指南 입문 가이드 คำแนะนำเริ ่ ม ต้ น Make sure to read this manual before using the machine. Please keep it in hand for future reference. 確保在使用本機之前閱讀本手冊。請妥善保管以便日後使用。 기기를 사용하기 전에 이 설명서를 읽도록 하십시오. 나중에 참고할 수 있도록 이를 가까운 곳에 보관해 두십시오. กรุ...
  • Page 2 เครื ่ อ งหมายที ่ ใ ช้ ใ นเอกสารนี ้ ■ ■ Symbols Used in This ■ ■ 本文件中使用的符號 이 문서에서 사용되는 기호 Document Prohibited actions. 禁止的操作。 금지된 작업입니다. การดำเนิ น การที ่ ถ ู ก ห้ า ม Instructions including important 包含重要資訊的說明。...
  • Page 3 On-screen manuals can be viewed on a computer. They are included on the Setup CD-ROM and are installed during the software installation. Some parts of the manual may be displayed in English. For details on opening the on-screen manuals, refer to page 64. 可以在電腦上檢視電子手冊。它們包含在安裝光碟中，在軟體安裝過程中安裝。手冊部分內容可能以英文顯示。關於開啟電子手冊的詳細資訊，請參閱第64頁。...

  • Page 4: Table Of Contents

    ■ สารบั ญ ■ Contents ■ ■ 目錄 목차 1 Preparation P.5 1 準備工作 P.5 1 การจั ด เตรี ย ม P.5 1 준비 P.5 2 ติ ด ตั ้ ง คาร์ ท ริ ด FINE P.13 2 Install the FINE Cartridges P.13 2 安裝FINE墨盒...

  • Page 5: Preparation

    ■ Machine Installation Network Connection Flow USB Connection 網路連接 ■ 本機安裝流程 네트워크 연결 USB連接 การเชื ่ อ มต่ อ กั บ เครื อ ข่ า ย ■ USB 연결 기기 설치 흐름 Wireless Connection Wired Connection Using from Additional 無線連接 有線連接...
  • Page 6 ■ Devices Required for Wireless/Wired Connection ■ 無線/有線連接所需裝置 ■ 무선/유선 연결에 필요한 장치 อุ ป กรณ์ ท ี ่ จ ำเป็ น สำหรั บ การเชื ่ อ มต่ อ แบบไร้ ส าย/แบบมี ส าย ■ When using the machine over a wireless/wired connection, the following devices are required depending on the connection method. 透過無線/有線連接使用本機時，根據連接方法需要如下裝置。...
  • Page 7 Make sure all the following items are supplied. • Do not install the machine where an object may fall on it. In addition, do not place any object on the top of the machine. 1. FINE cartridges (Color, Black) 5. Setup CD-ROM (containing the drivers, It may fall into the machine when opening covers, resulting in applications and on-screen manuals) 2.
  • Page 8 Do not connect the power cord yet. 請勿連接電源 線。 Remove all the protective materials 1. Open the Paper Output Tray (A). and orange tape from the outside of the 2. Make sure the Document Cover (B) is closed, then lift to open the Scanning Unit (Cover) (C). machine.
  • Page 9 Remove both the orange tape (E) and the protective material (F) 1. Lift the Scanning Unit (Cover) slightly. carefully. 2. Fold the Scanning Unit Support. 3. Close the Scanning Unit (Cover) gently. 1. 輕輕地抬起掃描單元(機蓋)。 小心移除橙色膠帶(E)和保護材料(F)。 2. 摺疊掃描單元支架。 3. 輕輕關閉掃描單元(機蓋)。 오렌지색 테이프(E)와 보호재(F)를 모두 조심스럽게 제거합니다. 1.
  • Page 10 Use fax features? Connect one end of supplied • If you cannot send faxes after installing the machine, check the following: • The basic connection telephone line cable (G) to the 1. The telephone line cable is connected to connector labeled “L” on the method is described machine.
  • Page 11 Only when connecting a telephone or an answering machine 僅連接電話或答錄機時 전화기나 자동 응답기를 연결할 경우에만 เฉพาะในกรณี ท ี ่ เ ชื ่ อ มต่ อ โทรศั พ ท์ ห รื อ เครื ่ อ งตอบรั บ อั ต โนมั ต ิ Remove the Cap (I) (1), then connect a telephone or an answering machine with Insert the power cord into the connector on the machine and into the wall outlet the telephone line cable (2).
  • Page 12 Press the ON button (J) to turn on the machine. Use the { or } button (K) on the Operation Panel to select the language for the LCD (Liquid Crystal Display) (L), then press the OK button. • It takes about 5 seconds for the ON button to work after the power cord is plugged in. •...
  • Page 13 Select the country or region of use, then press the OK button. When this screen is displayed, proceed to the next step. • The Country select screen may not be displayed depending on the country or region of purchase. 選擇使用的國家或地區，然後按OK按鈕。 顯示此螢幕時，繼續執行下一步。...
  • Page 14 When it is necessary to turn off the machine • The specification of the power cord differs for each country or region. 需要關閉本機時 • 每個國家或地區的電源線規格都有所不同。 기기를 꺼야 하는 경우 • 전원 코드의 사양은 각 국가 또는 지역에 따라 다릅니다. เมื ่ อ จำเป็ น ต้ อ งปิ ด เครื ่ อ ง ข้...
  • Page 15 1. Make sure the Document Cover (A) is closed, then lift to open the Scanning Unit (Cover) (D). 2. Fix it with the Scanning Unit Support (E). • When you lift the Scanning Unit (Cover), do not touch the buttons on the Operation Panel (F) or the LCD (G). May result in unintended operation. 1.
  • Page 16 The FINE Cartridge Holder (H) moves to the Follow the next procedure to insert the Open the Ink Cartridge Locking Cover on the right side. installation position. Black and Color FINE Cartridges into their corresponding slots Pinch (I) firmly and pull up the cover. If the FINE Cartridge Holder does not move, make sure that the machine is turned on.
  • Page 17 After removing the Black FINE Cartridge from its box, pull the orange protective tape (J) in the direction of the arrow and remove it carefully. • Handle the FINE Cartridges carefully. Do not drop or apply excessive pressure to them. •...
  • Page 18 Place the Black FINE Cartridge into the right slot Push down of the Ink Cartridge Locking Cover until it snaps into place. View the Ink Cartridge Locking Cover straight on and check that it is locked correctly (not at an angle). •...
  • Page 19 Insert the Color FINE Cartridge into the left FINE Cartridge Holder in the 1. Lift the Scanning Unit (Cover) slightly. same way as the Black FINE Cartridge. 2. Fold the Scanning Unit Support. 3. Close the Scanning Unit (Cover) gently. 1.
  • Page 20 Wait for about 1 minute until the LCD changes as shown in the illustration, then proceed to the next step. • Once you have installed the FINE Cartridges, do not remove them unnecessarily. • If an error message is displayed on the LCD, make sure that the FINE Cartridges are correctly installed. •...
  • Page 21 Open the Paper Support Move the Paper Guides Load paper in the center Slide the left and right Paper Guides against both (A). (B) to both edges. of the Rear Tray (C). edges of the paper. Make sure that the height of the paper stack does not exceed the line (D).

  • Page 22: Select Connection Method

    Read this section only when using the fax Depending on your needs, select one of the following three modes for receiving features. faxes. You can change the receive mode after installation is complete. For details, refer to “Setting the Receive Mode” in the on-screen manual: Basic Guide. If not using the fax features, go to “5 Select Connection Method”...
  • Page 23 Intended Use Receive Mode 預期用途 接收模式 사용 목적 수신 모드 โหมดรั บ การใช้ ท ี ่ ต ั ้ ง ไว้ • Use a single telephone line for both voice and fax calls. • Prioritize voice calls over fax reception. TEL priority mode •...
  • Page 24 Responses to Calls in Each Mode 在各種模式下回應來電 각 모드에서의 호출에 대한 응답 คำตอบการเรี ย กเข้ า ในแต่ ล ะโหมด When a fax call arrives When a voice call arrives 有傳真呼叫時 有語音呼叫時 팩스 호출이 도착한 경우 음성 호출이 도착한 경우 เมื ่ อ มี แ ฟกซ์ เ ข้ า เมื...
  • Page 25 Press the FAX button (A). Press the center FUNCTION button (B). Use the { or } button (C) to select a receive mode, then press the OK button. The fax standby screen returns. 按傳真按鈕(A)。 按中間的功能按鈕(B)。 使用{或}按鈕(C)選擇接收模式，然後按OK按鈕。 返回至傳真待命螢幕。 { 또는 } 버튼(C)을 사용하여 수신 모드를 선택한 다음 OK 버튼을 누 팩스...

  • Page 26: Wireless Setup

    Intended Use Connection Method 預期用途 連接方法 사용 목적 연결 방법 การใช้ ท ี ่ ต ั ้ ง ไว้ วิ ธ ี ก ารเชื ่ อ มต่ อ • Connect to a computer with a USB cable. USB Connection Go to “6 Install the Software (USB Connection)” on page 26.
  • Page 27 What is Network? If you are not certain whether your device (access point, router, etc.) supports wireless connection or wired connection, refer to the manual supplied with the device, or contact its manufacturer. A system to exchange information between computers by connecting them to each other with cables or via wireless communication.
  • Page 28 Do not connect the USB cable yet. 請勿連接USB電纜線。 아직 USB 케이블을 연결하지 마십시오. อย่ า เชื ่ อ มต่ อ สายเคเบิ ล USB To use the machine by connecting it to a computer, software 要透過連接至電腦使用本機，需要將包括驅動程式在內的軟體複製 including the drivers needs to be copied (installed) to the (安裝)至電腦的硬碟。安裝過程大約需要20分鐘。(根據電腦環境或...
  • Page 29 Easy-WebPrint EX Easy-WebPrint EX If the USB cable is connected before the software is installed Easy-WebPrint EX 如果在安裝軟體之前連接了USB電纜線 Easy-WebPrint EX 소프트웨어를 설치하기 전에 USB 케이블이 연결된 경우 หากเชื ่ อ มต่ อ สายเคเบิ ล USB ก่ อ นการติ ด ตั ้ ง ซอฟต์ แ วร์ For Windows 7 Easy-WebPrint EX is Web print software that is installed on the...
  • Page 30 Press the ON button (A) to TURN OFF THE 1. Make sure that the machine has turned off. For Windows MACHINE. 2. Turn on the computer. • If the program does not start automatically, double-click Operating noise may continue for up to 30 seconds until the 3.
  • Page 31 Windows 7/Windows Vista Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Windows XP Continue on the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue. 在自動播放(AutoPlay)螢幕上按一下執行Msetup4.exe(Run Msetup4. exe)，然後在使用者帳戶控制(User Account Control)對話方塊上按一下...
  • Page 32 Select your place of residence, then click Next. Select a country or region, then click Next. • If the Select Language screen appears, select a language, then click Next. 選擇居住地，然後按一下下一步(Next)。 選擇國家或地區，然後按一下下一步(Next)。 • 如果出現選擇語言(Select Language)螢幕，選擇一種語言，然後按一下下一步(Next)。 사용자의 거주지를 선택한 후 다음(Next)을 클릭합니다. 국가...
  • Page 33 Click Easy Install. Click Install. Select Use the printer via USB, then click Next. The drivers, application software, and on-screen manuals are installed. Follow any on-screen instructions to proceed with the software installation. • If you want to select particular items to install, click Custom Install.
  • Page 34 USB Port If the serial number is not displayed on the registration screen, input the number found inside the machine. USB連接埠 USB 포트 如果註冊螢幕上未顯示序列號，請輸入從本機內部找到的號碼。 พอร์ ต USB 일련 번호가 등록 화면에 표시되지 않을 경우, 기기 내부에 있는 번호를 입력합니다. เมื ่ อ หมายเลขซี เ รี ย ลไม่ ไ ด้ แ สดงขึ ้ น บนหน้ า จอการลงทะเบี ย นโดยอั ต โนมั ต ิ ป้ อ นหมายเลขที ่ อ ยู ่ ด ้ า นในของเครื ่ อ ง Serial No.
  • Page 35 If the Extended Survey Program screen appears 如果出現Extended Survey Program螢幕 Extended Survey Program 화면이 나타나는 경우 หากหน้ า จอ Extended Survey Program ปรากฏขึ ้ น Click Exit to complete the installation. For Macintosh It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time. If you can agree to Extended Survey Program, click Agree.
  • Page 36 Menu EX may vary 要了解關於Solution Menu 接)」第28頁中的 開始執行。在 中按一下自訂安裝(Custom Solution Menu EX starts when clicking depending on the Install)，然後在自訂安裝(Custom Install)螢幕中選擇XPS印表 EX和電子手冊的更多資訊， OK in the Canon Solution Menu EX country or region of 機驅動程式(XPS Printer Driver)。 dialog. purchase. 請進入第64頁。要開始使用 關於XPS印表機驅動程式的有用功能的詳細資訊，請參閱電子手 Remove the Setup CD-ROM and keep 本機，請進入第66頁。...
  • Page 37 Before Configuring Wireless Settings 配置無線設定前 무선 설정을 구성하기 전에 ก่ อ นที ่ จ ะกำหนดการตั ้ ง ค่ า แบบไร้ ส าย After confirming the connection, perform the following Make sure that the computer and access point or router are instructions to add (connect) the machine to the network.

  • Page 38: Notes On Wireless Connection

    ■ Notes on Wireless Connection ■ 無線連接注釋 ■ 무선 연결에 대한 참고사항 หมายเหตุ ใ นการเชื ่ อ มต่ อ แบบไร้ ส าย ■ • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device’s instruction manual or contact its manufacturer. • Check if your device supports IEEE802.11n/g/b. • In an office setup, consult your network administrator. • If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party. •...
  • Page 39 ■ Check the Information for Wireless Connection ■ 檢查無線連接的資訊 ■ 무선 연결 정보 확인 ตรวจสอบข้ อ มู ล สำหรั บ การเชื ่ อ มต่ อ แบบไร้ ส าย ■ In most cases, “Easy Setup” will be used to connect the machine to your access point or router. Before you continue, you must gather the following information which will be required during the installation.
  • Page 40 For details on how to check the following information, refer to the manual of your access point or router, or contact its manufacturer. 關於如何檢查以下資訊的詳細資訊，請參閱存取點或路由器的手冊或聯絡其製造商。 다음 정보를 확인하는 방법에 대한 자세한 내용은 액세스 포인트나 라우터의 설명서를 참조하거나 해당 제조업체에 문의하십시오. รายละเอี ย ดเกี ่ ย วกั บ วิ ธ ี ต รวจสอบข้ อ มู ล ต่ อ ไปนี ้ ดู ท ี ่ ค ู ่ ม ื อ ที ่ จ ั ด มาให้ พ ร้ อ มกั บ จุ ด เข้ า ใช้ ง านหรื อ เราเตอร์ หรื อ ติ ด ต่ อ ผู ้ ผ ลิ ต อุ ป กรณ์ ด ั ง กล่ า ว Access Point Name/Network Name Network Key 存取點名稱/網路名稱...
  • Page 41 1. Press the Setup button (A). Use the { or } button (C) to select Yes, then press Select Easy setup, then press the OK the OK button. button. 2. Use the [ or ] button (B) to select Wireless LAN setup. When wireless connection is enabled, the Wi-Fi lamp (D) lights 3.
  • Page 42 Select the access point name you wrote down on When one of the above screens is If the above screen is not displayed, go to page 38, then press the OK button. displayed, enter the network key you Press the button to switch character entry modes. wrote down on page 38 using the Network key entry is case-sensitive.
  • Page 43 When the above screen appears, press the OK button. Make sure that the network key is correct, then press the OK button. Next, read • If Failed to connect to the access point. appears, press the OK button, make sure that the “9 Install the network key is correct, then enter it again.
  • Page 44 Before Configuring Wired Settings 配置有線設定前 유선 설정을 구성하기 전에 ก่ อ นที ่ ก ารกำหนดการตั ้ ง ค่ า แบบมี ส าย After confirming the connection, perform the following Make sure that the computer and router are connected. instructions to add (connect) the machine to the network. 確保電腦或路由器已連接。...
  • Page 45 ■ Notes on Wired Connection ■ 有線連接注釋 ■ 유선 연결에 대한 참고사항 หมายเหตุ ใ นการเชื ่ อ มต่ อ แบบมี ส าย ■ • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer. • In an office setup, consult your network administrator. • If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party. •...
  • Page 46 Remove the Cap (A), then connect a network device (router, etc.) with an Ethernet 1. Press the Setup button (C). cable (B). 2. Use the [ or ] button (D) to select Device settings. 3. Press the OK button. 1. 按設定按鈕(C)。 取下蓋(A)，然後使用乙太網路電纜線(B)連接網路裝置(路由器等)。...
  • Page 47 Use the { or } button (E) to select LAN settings, then press the Select Change wireless/wired, then press the Select Wired LAN active, then press the OK OK button. OK button. button. Next, read “9 Install the Software (Network Connection)”...
  • Page 48 To use the machine by connecting it to a computer, software 要透過連接至電腦使用本機，需要將包括驅動程式在內的軟體複製 including the drivers needs to be copied (installed) to the (安裝)至電腦的硬碟。安裝過程大約需要20分鐘。(根據電腦環境或 computer’s hard disk. The installation process takes about 20 要安裝的應用程式軟體數量的不同，安裝時間也會有所不同。) minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.) •...
  • Page 49 Easy-WebPrint EX Easy-WebPrint EX Easy-WebPrint EX Easy-WebPrint EX Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software. Internet Explorer 7 or later (Windows) or Safari 4 or later (Mac OS X v.10.5 or later) is required to use this software.
  • Page 50 Windows 7/Windows Vista Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on Windows XP the User Account Control dialog box. If the User Account Control dialog box reappears in following steps, click Yes or Continue. 在自動播放(AutoPlay)螢幕上按一下執行Msetup4.exe(Run Msetup4.exe)，然後在使 用者帳戶控制(User Account Control)對話方塊上按一下是(Yes)或繼續(Continue)。...
  • Page 51 Select your place of residence, then click Next. Select a country or region, then click Next. Click Easy Install. The drivers, application software, and on-screen manuals are installed. • If the Select Language screen appears, select a language, then click Next. •...
  • Page 52 Click Install. If you select wireless connection on page 24 Select Use the printer with wireless LAN connection, then click Next. If you select wired connection on page 24 Select Use the printer with wired LAN connection, then click Next. Follow any on-screen instructions to proceed with the software installation.
  • Page 53 When the Printer Detection screen appears, click Next. • If the Printer Connection screen appears instead of the screen above, the connection method is not correctly selected in − For Windows Click Cancel and start again from , then select the connection method, which you select on page 24, in −...
  • Page 54 기가 표시되지 않으면 네트워크 설치 문제 해결 인쇄 설명서를 참조하십시오. เมื ่ อ ไดอะล็ อ กบ็ อ กซ์ รายการเครื ่ อ งพิ ม พ์ ท ี ่ ต รวจพบ(Detected Printers List) ปรากฏขึ ้ น เลื อ กเครื ่ อ ง Canon MX420 series จากนั ้ น คลิ ก ถั ด...
  • Page 55 When the Setup Completion dialog box appears, Next, read “Information” on page 58! click Complete. 出現安裝完成(Setup Completion)對話方塊時，按一下完 下一步，請閱讀第58頁的「資訊」！ 成(Complete)。 설치 완료(Setup Completion) 대화 상자가 나타나면 완 다음 58페이지의 "정보"를 읽으십시오! 료(Complete)를 클릭합니다. เมื ่ อ ไดอะล็ อ กบ็ อ กซ์ การติ ด ตั ้ ง เสร็ จ สิ ้ น (Setup Completion) ปรากฏ จากนั...
  • Page 56 55페이지의 로 이동합니다. กลุ ่ ม อั ก ขระตั ว เลขและตั ว อั ก ษรข้ า งหลั ง Canon MX420 series เป็ น ชื ่ อ บริ ก าร Bonjour หรื อ ที ่ อ ยู ่ • MAC ของเครื ่ อ ง...

  • Page 57: Printer List

    Mac OS X v.10.6.x/v.10.5.x Mac OS X v.10.4.11 Mac OS X v.10.4.11 Select Canon MX420 series canonijnetwork and click Add. When the Printer List window Click More Printers in the Printer Browser window. appears, click Add. Go to on page 56.
  • Page 58 음 추가(Add)를 클릭합니다. 십시오. 으로 이동합니다. เลื อ ก Canon IJ Network ในเมนู ป ๊ อ ปอั พ เลื อ ก Canon ตรวจสอบว่ า ได้ เ พิ ่ ม Canon MX420 เมื ่ อ หน้ า จอ Register Printer and Scanner ปรากฏขึ ้ น คลิ ก Register Scanner MX420 series ในรายชื...
  • Page 59 Register Printer and Scanner 화면에서 Next를 클릭합니다. series를 선택한 다음 OK를 클릭합니다. 다음 58페이지의 "정보"를 읽으십시오! เลื อ ก Canon MX420 series ในหน้ า จอ Canon IJ Network Scanner Selector EX จากนั ้ น คลิ ก Next ในหน้ า จอ Register Printer and Scanner คลิ ก OK ต่ อ ไป อ่ า น 'ข้ อ มู ล ' ในหน้ า 58!
  • Page 60 If the serial number is not displayed on the registration screen, input the number found inside the machine. 如果註冊螢幕上未顯示序列號，請輸入從本機內部找到的號碼。 일련 번호가 등록 화면에 표시되지 않을 경우, 기기 내부에 있는 번호를 입력합니다. เมื ่ อ หมายเลขซี เ รี ย ลไม่ ไ ด้ แ สดงขึ ้ น บนหน้ า จอการลงทะเบี ย นโดยอั ต โนมั ต ิ ป้ อ นหมายเลขที ่ อ ยู ่ ด ้ า นในของ เครื...
  • Page 61 If the Extended Survey Program screen appears 如果出現Extended Survey Program螢幕 Extended Survey Program 화면이 나타나는 경우 หากหน้ า จอ Extended Survey Program ปรากฏขึ ้ น Click Exit to complete the installation. For Macintosh It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time.
  • Page 62 Solution Menu EX เริ ่ ม ต้ น สำหรั บ Macintosh Solution Menu EX เริ ่ ม เมื ่ อ คลิ ก OK ในไดอะล็ อ กบ็ อ กซ์ Canon Solution Menu EX นำ Setup CD-ROM ออกและเก็ บ ไว้ ใ นที ่ ป ลอดภั ย...

  • Page 63: Connection

    Using the Machine from Additional Computers Congratulations! Setup is complete. Now that the machine is setup on your wireless/wired connection, you can install the software and drivers on additional computers on To learn more about the Solution Menu EX the same network. Additional settings are not required. and on-screen manual, proceed to page 64.
  • Page 64 If the machine is already connected to a wireless/wired connection, it can be used from additional computers on the same network. 如果本機已連接至無線/有線連接，可以在同一網路上的其他電腦上進行使用。 기기가 이미 무선/유선 연결로 연결된 경우, 이를 동일한 네트워크의 추가된 컴퓨터에서 사용할 수 있습니다. หากได้ เ ชื ่ อ มเครื ่ อ งต่ อ เข้ า กั บ การเชื ่ อ มต่ อ แบบไร้ ส าย/แบบมี ส าย เครื ่ อ งนี ้ จ ะสามารถใช้ ไ ด้ จ ากคอมพิ ว เตอร์ ท ี ่ เ พิ ่ ม เข้ า มาบนเครื อ ข่ า ยเดี ย วกั น To use from additional computers Computer from which the machine can be used currently Insert the Setup CD-ROM into the computer from which...

  • Page 65: Usb 연결에서 무선 연결로 변경

    To change to a wireless connection from a USB connection, start over from “7 Wireless Setup” on page 35 to set up a wireless connection. 要從USB連接變更到無線連接，返回第35頁的「7 無線設定」以設定無線連接。 USB 연결에서 무선 연결로 변경하려면 35페이지의 "7 무선 설정"부터 다시 시작하여 무선 연결을 설정하십시오. เพื...
  • Page 66 Solution Menu EX Various application software are installed on the computer along with the drivers. You can print creative items by correcting/enhancing Solution Menu EX is a gateway to functions and information that allow you to make full photos using the application software. use of the machine! For example, For details on how to use the application •...
  • Page 67 Easy-WebPrint EX For details on Solution Menu EX and Easy-WebPrint EX, refer to the on- screen manual: Basic Guide. Use Easy-WebPrint EX to easily print web pages in Internet Explorer (Windows) or Safari (Macintosh). Some of its features include: • Printing a web page by reducing its size to fit the paper width automatically without cropping edges.
  • Page 68 Load paper in the Rear Tray (A) in portrait orientation with the printing side facing up. (For details, refer to page 19.) Make sure that the Paper Output Tray (B) is open. If printing starts while the Paper Output Tray is closed, it will automatically open. This section explains how to print images stored on the computer.

  • Page 69: Select Paper

    1. To start Solution Menu EX, click the (Solution Menu EX) icon Select a folder containing images, then Click Select Paper, then select the Paper Size and on the desktop (Windows) or on the Dock (Macintosh). select an image you want to print. Media Type settings that match the loaded paper.
  • Page 70 Click Layout/Print, then select a layout for the image. Click Print. For more If you are using Windows, printing will start. information, refer If you are using Macintosh, click Print on the Print dialog box to start printing. to the on-screen manual: Advanced •...
  • Page 71 Load A4 or Letter-sized plain paper. (For details, refer to page 19.) Open the Document Cover (B), then place the document face-down and align it with the Alignment Mark (C). Make sure that the Paper Output Tray (A) is open. If printing starts while the Paper Output Tray is closed, it will automatically open.
  • Page 72 1. Close the Document Cover. Copying will start. Remove the document after printing. For the procedure to copy on paper other than 2. Press the COPY button (E). plain paper, refer to “Copying” in the on-screen • Close the Document Cover gently, holding it The copy standby screen is displayed.
  • Page 73 Press the FAX button (A). • Make sure that the telephone line type is set correctly. For the setting procedure, refer to “Preparing for Faxing” in the on-screen manual: Basic This section explains how to send a fax in black and white from the ADF (Auto Document Guide.
  • Page 74 Open the Document Tray (C), then move the Document Guides (D) to both edges. 1. Insert the document face-up until a beep sounds. 2. Slide the left and right Document Guides against both ends of the document. • For details on supported documents and settings for image quality, density (brightness), etc., refer to the on-screen manual: Basic Guide.

  • Page 75: Send Faxes

    Use the Numeric buttons (E) to enter the fax number. Press the Black button (F). For other procedures The fax is sent. to send faxes, refer to • If fax sending is unsuccessful, make sure that the telephone line is connected correctly and start again from on page 71.
  • Page 76 Read this section only when setting up a wireless connection by using the WPS (Wi-Fi Protected Setup). 只有在透過使用 WPS (Wi-Fi Protected Setup)設定無線連接 時閱讀本節。 1. Press the Setup button (A). Use the { or } button (C) to select Yes, then press the OK button.
  • Page 77 Select Other setup, then press the OK Select WPS, then press the OK button. Select Push button method, then press the Press the OK button. button. OK button. 選擇其他設定(Other setup)，然後按 選擇單鍵方法(Push button method)，然後按 選擇WPS，然後按OK按鈕。 按OK按鈕。 OK按鈕。 OK按鈕。 기타 설정(Other setup)을 선택한 다음 WPS를...
  • Page 78 Press and hold the WPS button on the access point (for about When the above screen appears, press the OK button. Next, read “9 Install 5 seconds), then press the OK button on the machine within 2 the Software (Network minutes.
  • Page 79 ปฏิ บ ั ต ิ ต ามคำแนะนำบนหน้ า จอเพื ่ อ เสร็ จ สมบู ร ณ์ ก ารตั ้ ง ค่ า ในคอมพิ ว เตอร์ Canon จะไม่ ร ั บ ผิ ด ชอบต่ อ กรณี ข ้ อ มู ล ใน USB แฟลชไดรฟ์ ถ ู ก ทำลายหรื อ สู ญ หายแม้ อ ยู ่ ภ ายในช่ ว งระยะเวลารั บ ประกั น...
  • Page 80 Windows Vista 1. From the Start menu of the Windows side, select Network, then click Add a wireless device on the menu. 2. Click I want to add a wireless device or computer that is not on the list, using a USB flash drive. 3.
  • Page 81 After a period of use, the inside of the machine may become stained with ink. To avoid staining your hands or clothes with ink, it is recommended that you clean the Ink Cartridge Locking Cover (A) and the inside of the tray (B) with a facial tissue or the like as required.

  • Page 82: Specifications

    (Based on ITU-T No.1 chart for US specifications and Canon FAX Scanning resolution IEEE802.11n/IEEE802.11g/IEEE802.11b *5 Standard chart No.1 for others, both in standard mode or Canon FAX Standard chart No.1, standard mode.) Optical resolution (horizontal X vertical) max: 1200 X 2400 dpi *1 A computer that complies with Hi-Speed USB standard is required.
  • Page 83 Windows: Operation can only be guaranteed on a PC with Windows 7, 支援的標準︰IEEE802.11n/IEEE802.11g/IEEE802.11b 儲存環境 Windows Vista or Windows XP pre-installed. • Windows: Uninstall software bundled with the Canon inkjet printer 頻率頻寬︰2.4GHz 溫度：0至40°C(32至104℉) before upgrading from Windows Vista to Windows 7, then, install the 通道︰1-11或1-13 濕度：5至95%RH(無冷凝)
  • Page 84 512MB Mac OS X v.10.4.11 LAN 포트: 傳送速度 Windows XP SP2、SP3 Intel處理器、PowerPC G5、 유선 LAN: 黑白：傳輸速度為33.6kbps，大約3秒鐘/頁 300MHz處理器 PowerPC G4、PowerPC G3 100BASE-TX/10BASE-T [基於ITU-T No.1圖表(對於美國規格)和Canon No.1傳真標準圖表(對於其他 128MB 256MB 무선 LAN: 地區規格)，且均在標準模式或Canon No.1傳真標準圖表的標準模式下。] IEEE802.11n/IEEE802.11g/IEEE802.11b *5 瀏覽器 彩色︰傳輸速度為33.6kbps，大約1分鐘/頁 Internet Explorer 6或更新版本 Safari 3或更新版本 (基於Canon彩色傳真測試頁。) *1 Hi-Speed USB 표준과...
  • Page 85 256MB (미국 사양은 ITU-T No.1 차트를 기준으로 하고 기타 사양은 Canon No.1 팩 스캔 해상도 스 표준 차트를 기준으로 하며, 모두 표준 모드 또는 Canon No.1 팩스 표준 브라우저 차트, 표준 모드에서 측정하였습니다.) 최대 광학 해상도(수평 X 수직): 1200 X 2400dpi Internet Explorer 6 이상...
  • Page 86 (ตามแผนผั ง ITU-T No.1 สำหรั บ ข้ อ กำหนดของสหรั ฐ ฯ และมาตราฐาน Canon FAX *2 ความเร็ ว สู ง สุ ด : 1.44 Mbps แผนผั ง No.1 สำหรั บ อื ่ น ๆ ในโหมดมาตราฐานหรื อ มาตราฐาน Canon FAX แผนผั ง No.1 ความละเอี ย ดการสแกน...
  • Page 87 • v.10.6 ให้ ต ิ ด ตั ้ ง ซอฟต์ แ วร์ ท ี ่ จ ั ด มาให้ พ ร้ อ มกั บ เครื ่ อ งพิ ม พ์ inkjet Canon Internet Explorer 7 หรื อ ขึ ้ น ไป (Windows) หรื อ Safari 4 หรื อ ขึ ้ น ไป (สำหรั บ Mac OS •...
  • Page 88 098632 CANON HONGKONG CO.LTD. 19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, The following ink cartridges are compatible with this machine. Kowloon, Hong Kong CANON KOREA BUSINESS SOLUTIONS INC. 以下墨盒與本機相容。 168-12 Samseong-Dong, Gangnam-gu, Seoul, Korea 다음 잉크 카트리지는 이 기기와 호환됩니다. www.canon-bs.co.kr คาร์ ท ริ ด หมึ ก ต่ อ ไปนี ้ ส ามารถใช้ ง านร่ ว มกั บ เครื ่ อ งนี ้...