Writing The First Start Id Automatically - Semi-Auto Mode - Sony PCM-M1 Operating Instructions Manual

Notes
• The buttons except the
p STOP button do not
work while
is flashing.
• When writing Start IDs
continuously, make
sure that there is an
interval of 9 seconds or
longer (18 seconds or
longer in the LP mode)
between the start IDs.
Otherwise, the tape-
corder may not locate
the beginning of a track
correctly.
2
Press CLOCK/SET for 2
seconds or longer. "CLOCK"
will appear in the display.
3
Press RESET • + or COUNTER
• – repeatedly and select "SET
SID".
4
Press CLOCK/SET.
5
Press RESET • + or COUNTER • – repeatedly and
select "SID on" or "SID oFF".
SID on: The recorder will write a Start ID when
you start recording or release pause.
SID oFF: The recorder will not write a Start ID
when you start recording or release pause.
6
Press CLOCK/SET.
The display returns to the clock.
Writing the first Start ID automatically
— Semi-auto mode
The Semi-auto mode is a further option in the Manual
mode. The Semi-auto mode will write a Start ID
automatically at the first sound input during Manual
mode. Use this feature to write a Start ID for each take.
1
If "AUTO-ID" is present in the display, press
START ID • MODE repeatedly until it disappears.
2
Hold down START ID • MODE
until "AUTO-ID" flashes in the
display.
When you start recording, a Start ID will be
written automatically at the first sound input.
continued
31 EN
Recording