Clock Display - Sony PCM-M1 Operating Instructions Manual

* The RECORDED TIME
is displayed while
playing back only.
Tips
• When the recorder
enters the recording,
recording monitor, or
pause mode while
RECORDED TIME is
indicated, the recorder
displays the current
time.
• To switch between 12-
hour or 24-hour clock
display, hold down
RESET • + for 2
seconds or longer.
Message display
Refer to page 45, 46 for
"Message Display".

Clock display

Each time the CLOCK/SET button is pressed (on the
remote control, the CLOCK button), the display
changes as follows:
Function setting display
To display the current setting for various functions,
hold down CLOCK/SET for 2 seconds or longer. Each
time RESET • + or COUNTER • – is pressed, the
display changes as follows:
RECORDED TIME*
(date of the recording)
RECORDED TIME*
(time of the recording)
Current date
(year, month, date)
Current time
(hour, minute, second)
Clock setting (page 13)
Copy code status (page 28)
Start ID write threshold
setting (page 32)
Start ID on/off setting for
the beginning of recording
(page 30)
PEAK HOLD setting (page 26)
Location of Controls
11 EN