Playback; Connecting With Other Equipment For Playback; Playback With An Analog Audio Equipment; Playback With An Audio Equipment With Digital Input - Sony PCM-M1 Operating Instructions Manual

( Playback

Connecting with Other Equipment for
Playback
You can connect the tape-corder to other analog audio
equipment and audio equipment with digital output.
Refer to page 20 for "Playing Back".
Tip
The output level of the
LINE OUT jack and the
REMOTE • DIGITAL I/O
jack is fixed. The volume
cannot be adjusted with
the VOL buttons of this
recorder.
Note
Use only the
recommended optical
cable (not supplied)
(page 53).
You cannot use the
POC-DA12/DA12M/
DA12S digital
connecting cables with
this unit.
36 EN
Playback
Playback with an analog audio
equipment (Analog connection)
PCM-M1
Audio connecting cable
RK-G129 (not supplied)
to LINE OUT
Begin playback and adjust the volume of the
connected equipment.
Playback with an audio equipment
with digital input (Digital connection)
PCM-M1
to REMOTE • DIGITAL I/O
Connect the digital audio equipment to this recorder
as shown. Begin playback and adjust the volume of
the connected equipment.
to LINE IN
Optical cable
POC-DA12P
POC-DA12MP
POC-DA12SP
(not supplied)
Stereo unit
or mixer,
etc.
DAT deck,
digital
amplifier,
etc.