(5)
Remove 1 screw and then take off the
sensor bracket.
(6)
Release the harness from the clamp and
then disconnect the connector.
(7)
Take off the reverse section stationary jam
detection sensor from the sensor bracket.
4.10.29 Exit paper cooling fan (front) (F5)
(1)
Take off the top front cover.
P. 4-2"4.1.5 Top front cover"
(2)
Pull out the bridge unit.
(3)
Remove 2 screws and then take off the inner
cover.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Sensor bracket
Fig. 4-676
Reverse section stationary jam detection sensor
Fig. 4-677
Fig. 4-678
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
4 - 233
DISASSEMBLY and REPLACEMENT
4