System Configuration 01 - Wolf BWL-1S-05 Installation And Operating Instructions Manual

29.2.1 System configuration 01
BWL-1S(B)
● Split air/water heat pump
● Cylinder in series
● One heating circuit
● DHW heating
● Active cooling possible (in conj. with additional 3-way diverter valve for cooling)
DHW cylinder
Outdoor module
A 3-way diverter valve for
central heating/DHW and a
feed/heating circuit pump
are integrated into the
indoor module
Important information:
In this schematic diagram, shut-off valves, air vent valves and safety equipment are not fully represented.
These should be provided for each system individually, in line with the applicable standards and regulations.
Hydraulic and electrical data can be found in the hydraulic system solutions technical guide.
72
System configurations
Heating circuit
SF
Indoor module
Cylinder in series
3-way diverter valve
heating/cooling
(with active cooling)
3064298_201805