System Configurations - Wolf BWL-1S-05 Installation And Operating Instructions Manual

29 System configurations
Overview
The following system configurations can be performed for operating the BWL-1S and BWL-1SB.
Contractor Meaning
Parameter
System
WP001 System configuration
System config. Description
01 Cylinder in series, one heating circuit, DHW heating, active cooling possible
(in conj. with additional 3-way diverter valve for cooling)
02 Cylinder in series, DHW heating, can be extended with mixer circuits,
can be extended with solar circuit
05 Cylinder in series via 3-way valve, one heating circuit, DHW heating,
can be extended with solar circuit, active cooling possible
11 Separating cylinder, one heating circuit, DHW heating
12 Solid fuel boiler / TOB, stratification cylinder BSP-W / BSP-W-SL / BSH, DHW heating,
can be extended with mixer circuits, can be extended with solar circuit
14 Solid fuel boiler / TOB, stratification cylinder BSP-W / BSP-W-SL / BSH, DHW heating,
can be extended with mixer circuits, can be extended with solar circuit, active cooling possible
15 Separating cylinder, one heating circuit, DHW heating, can be extended with mixer circuits,
can be extended with solar circuit, active cooling possible
33 Separating cylinder, CGB-2 ..., heating circuit downstream of low loss header, DHW heating,
can be extended with mixer circuits, can be extended with solar circuit
34 TOB, stratification cylinder, BSH, BSP-W, BSP-W-SL, DHW heating, can be extended with
mixer circuits, can be extended with solar circuit
51 0 - 10 V activation for external demand (e.g. by building management system (BMS)),
central heating, DHW heating, active cooling possible
52 ON/OFF activation for external demand (e.g. by building management system (BMS)),
central heating, DHW heating
The entire system must be restarted (power off/power on) each time a change is made to the configuration.
Note:
Hydraulic diagrams and electrical details can be found on the WOLF homepage and in the "Hydraulic System
Solutions" technical guide.
QR code for hydraulic database
3064298_201805
System configurations
Setting range
01, 02, 05, 11, 12, 14,
15, 33, 34, 51, 52
Factory Individual
setting setting
01
71