VeriFone VX 680 Reference Manual page 40

V T M
ERIX ERMINAL ANAGER
Verix Terminal Manager Menus
40
VX 680 R
EFERENCE
Table 6 Verix Terminal Manager Menu 1
Display
VERIX DIAGS MGR
1> Battery Status
2> USB Info
3> Display Testscreen
4> Verix Hash
5> RAD Switch
6> CIB Information
7> VTP Status
8> License Listing


9> DIAGS 1> PRINTER DIAG
Printer ID P
Version 0PRED1A2
Status 20
1> Test
2> Paper Feed

G
UIDE
Action
To choose an option in the menu, press the
corresponding number on the keypad or scroll down to
the option using the DOWN key and press ENTER.
To view the battery status, select
1> BATTERY STATUS
To view the USB device information, select
2> USB INFO
To test the display screen, select
TESTSCREEN
To display the hash information, choose


4> VERIX HASH
To enable HW pass-thru on a CDMA radio, choose
5> RAD SWITCH
To view CIB information, choose
6> CIB INFORMATION
To view the VCL ELM status, choose
7> VTP Status
To view installed licenses, choose
8> License Listing
When you select
firmware version, and the printer status appear.
Press 1 to run the printer test. A print sample begins
that uses approximately 30.5cm (12 in) of paper. This
allows you to test the print quality and adjust your code
for print optimization.
Press 2 to run approximately 5cm (2 in) of paper
through the printer without printing. To go back to the
VERIX DIAGS MGR

.
.
3> DISPLAY
.
.
.
.
, the printer ID,
1> PRINTER DIAG
screen, press
CANCEL
.