Enter And Exit Verix Terminal Manager - VeriFone VX 680 Reference Manual

Enter and Exit Verix
Terminal Manager
NOTE
To enter terminal manager after you have turned on the VX 680 terminal, follow
the procedure described below.
On successful completion, some operations automatically exit Verix Terminal
Manager and restart the terminal. Other operations require that you exit Verix
Terminal Manager and restart the terminal. To manually exit Verix Terminal
Manager, select
1> RESTART
Table 5 Enter Verix Terminal Manager
Display
VERIFONE VX 680
QT6G012J
10/29/2012 Verix
COPYRIGHT 1997-2012
VERIFONE
ALL RIGHTS RESERVED
BATTERY 97%
FOR STATUS PRESS KEY 3
VERIFONE VX 680
QT6G012J
10/29/2012 Verix
COPYRIGHT 1997-2012
VERIFONE
ALL RIGHTS RESERVED
in .
VERIX TERMINAL MGR
Action
At startup, the terminal displays a copyright notice
screen that shows the terminal model number, the OS
version of the VX 680 stored in the terminal's memory,
the date the firmware was loaded into the terminal, and
the copyright notice.
This screen appears for three seconds, during which
time you can enter Verix Terminal Manager by
simultaneously pressing
You can extend the display period of this screen by
pressing any key during the initial three seconds. Each
keypress extends the display period an additional three
seconds.
If the battery has not been initially charged, the screen
displays
BATTERY NOT CALIBRATED
to initialize and condition the battery.
For more information about the battery, refer to
Smart Battery Information.
If some other certificate is loaded by a reseller (for
example, bank), the fourth line is left blank.
V T
ERIX ERMINAL
Verix Terminal Manager Menus
and key.
ENTER 7
to inform the user
VX 680
VX 680 R G
EFERENCE
M
ANAGER
25
UIDE