VeriFone VX 680 Reference Manual page 149

Table 20 Error Messages
Display
STARTUP ERRORS
DOWNLOAD NEEDED
<error message>
FLASH CHKSUM ERROR Gnn
RAM CHKSUM ERROR
Action
The following error messages may occur if a defect is
found on the *GO variable. *GO is a variable in the
CONFIG.SYS file and is the first thing that runs on
startup if available.
• NO *GO VARIABLE
variable in the group one CONFIG.SYS file.
• *GO NOT FOUND
executable file is missing.
• *GO NOT AUTHENTICATED
but the executable file is not authenticated.
• NOT ENOUGH MEMORY
but there is not enough memory to execute the file.
• INVALID *GO VARIABLE
condition. The system could not run the *GO
variable eventhough it is set, authenticated, and
enough memory is available to execute the file.
A corrupt file is detected in the F: drive file system
during terminal start up, after power on, or during
restart. This message may indicate a hardware
problem; the error condition may be resolved through
another download of the file.
Gnn A corrupt file is detected in the I: drive file system at
terminal start up, after power-on, or during restart. This
message may indicate a hardware problem; the error
condition may be resolved through another download
of the file.
S
YSTEM
- There is no *GO environment
- The *GO variable is set but the
- The *GO variable is set
- The *GO variable is set
- This is the defalut error
VX 680 R
EFERENCE
M
ESSAGES
Error Messages
149
G
UIDE