System Upgrade - JUKI PS-800 Instruction Manual

8.8 System Upgrade

Press
shown in the figure:
"CS01" represents the type of system, and remains unchanged after upgrade; "029" represents the
branch version number that can be changed through upgrade: It can be upgraded to a higher version or
fall back to a lower version.
information. "058" indicates the branch version number
: Click to select the mainboard and display
display . If you select the instruction, display
button to upgrade.
of USB flash disk; display the interface or motherboard upgrade files under all folders and current
directory.
The system upgrade steps in the figure are as follows:
1) Receive the corresponding upgrade file from the supplier. The extension of interface
upgrade file is .fcav (e.g. XH_HMI_T1_V074.fcav), and that of motherboard upgrade file
is .TFL (e.g., TZD_CS01.TFL). Put the file(s) in USB flash disk.
key in assist operation interface to enter the system upgrade interface as
: Upgrade package directory that is automatically read after the insertion
: Show current motherboard version information.
: Display the current screen interface version
79
. If you select the interface,
. Select the file and click the