Work Environment; Power Supply Requirement; Grounding Requirement - JUKI PS-800 Instruction Manual

 Some parts inside the case have high pressure; after the system is powered on, please do not
open the case cover, in order to avoid accidental injury.
 Please do not pile up sundry around the control box, and in the process of using; remove dust
on the surface of control box and the filter regularly, so as to keep good ventilation for the
system, which is good for heat dissipation.
 Without authorization of the company, please do not make any change to the product
arbitrarily, and the company shall not hold any responsibility for the consequences!
Warning:
If it really needs to open the case cover, it must be carried out5 minutes after cutting

off power and guided by professionals to contact components inside the electrical cabinet!
Danger:
When the machine is at work, it is forbidden to contact with any moving part or open

the control equipment, plug or pull out motor interface, otherwise it may cause personal
injury or the machine not to work!
It is forbidden for electrical equipment to work in places with humidity, dust,

corrosive gas, flammable and explosive gas, otherwise it may cause electric shock or fire!

1.3.2 Work Environment

Solid, level ground installation

Good ventilation, healthy environment, less dust

Temperature in work space: 5 to 40 ℃

Relative humidity in work space: 30% to 90% without condensation


1.3.3 Power Supply Requirement

 Single-phase AC220V/50 to 60 HZ
 It needs to be equipped with the voltage regulation equipment when the power grid voltage
fluctuation is more than 10%
 Equipment power is between 1.0 to 2.0KW according to different machine configuration

1.3.4 Grounding Requirement

 In order to prevent electric shock or fire accident of electrical equipment due to causes such
3