Main Menu Interface - JUKI PS-800 Instruction Manual

Total number of files completed by today:
number of processing times accumulated on that day. The number on the right indicate the cumulative
number of processing times on the day of the current figure. Click "Clear" to clear the total number of
processing times of the current graphics and the number of file processing times.
Use length of bobbin thread(mm): Refers to the length of the baseline that has been used up. After
setting it to the,it will accumulate baseline length of the current file when processing begins.
Total length of bobbin thread(mm): Refers to the total length of the initial bottom line in the
spindle. When winding, it can be estimated that the total length is equal to the average circumference
of the spindle multiplied by the speed multiplied by the winding time
Current value of Counter: Refers to the total number of processed documents. Each time the
processing is completed, it will automatically add 1, which cannot be closed.
Total number of Counter: Refers to the target number of times a processing document has been
completed.
Working time: Show the total processing time. Just count "working..." state time.
Today's work time: Show the processing time of the day. Click Clear to clear 0.
Work time yesterday: It shows the processing time yesterday. Click Clear to clear 0.
: Refers to the error margin of the remaining length of the baseline. (Baseline length
detection device for special purpose).
: The blue character in the lower left corner indicates the last processing time.
: The white words in the lower left corner indicate the total time of starting this time.

2.3 Main Menu Interface

Press
the figure:
key in main interface of processing to enter the main menu interface, as shown in
The number on the left indicates the total
15