Network Settings - JUKI PS-800 Instruction Manual

8.4 Network Settings

Used to set up wireless network connection.
Press
shown in the figure:
Device address: Show the unique address code of current device. The companion APP "Xing Huo
IoT" can be used to scan the QR code address of this interface to add the device to the APP for device
management.
Server IP: Used to connect a server with a specified IP in LAN to perform LAN control &
management. If one of the four input boxes is blank or 0, it means that an external cloud server is
automatically connected.
Server port: Used to connect a server with designated IP and port on LAN. If the port is 0 or
null, it means an external cloud server is connected.
: Click to enter the wireless network setup interface and automatically search for hotspots
available for current location as shown in the figure below. Click "
is searched for again. The number at upper right corner of each hotspot indicates signal strength;
the larger the number, the better the signal. Click on hotspot name and enter the password to
connect the hotspot. Once the connection is established, the IP address obtained by the current
device will be displayed. In the meantime, the
indicates the established connection with wireless network and server.
key in assist operation interface to enter the network setup interface as
in upper right corner of the screen
75
", when WIFI hotspot