Management Of Files In Usb Flash Disk - JUKI PS-800 Instruction Manual

If the recognition is by "file number", it means the processing file is matched by scanning barcode
with scanner. Method of binding processing file to barcode: Click this key after selecting the processing
file, enter the desired barcode value into the pop-up "Barcode" window, and click OK to return. At this
point, the set barcode is displayed on the graph.
If "By file name" is selected, it means the file name in IC card is recognized using electronic tag
reader so as to match processing file. Method of binding processing file to electronic tag: Click this
key after selecting the processing file, and click "Yes" in the pop-up confirmation window; when the
card reader beeps once, it means the file name has been successfully written into electronic tag; at this
point, the interface title bar shows that file name.
: Select all files, Select all files under the directory.
: Export file, Copy one or more files from the memory into the root directory of USB flash
disk. If a file exists with the same name in the USB flash disk, a message will appear reading "The
file already exists. Do you want to overwrite it?"
: The current storage space occupancy ratio, through which you can make clear understanding
of the storage occupancy.
: File in USB flash disk, Click to enter the "U-disk file" interface.

3.2 Management of Files in USB Flash Disk

Insert the USB flash disk, and press
USB flash disk file management interface as shown in the figure:
USB flash disk file management supports up to 15 Chinese characters or 30 characters display. If
USB flash disk is accessed through file management, the files and folders in .slw formats under root
directory of the USB flash disk are displayed by default; if USB flash disk is accessed through
key in memory management interface to switch to the
18