Lock Settings - JUKI PS-800 Instruction Manual

The time is displayed in a 24-hour system accurate to "second".
: "Save" button ， Click this key to save the set date and time. If the motherboard is equipped
with a battery, the time is updated at next startup even if the power was turned off so as to ensure
accurate time.
Accurate time helps sewing better, and enables the accurate recording of the time of problem in
alarm log, thereby facilitating troubleshooting and problem analysis.

8.6 Lock Settings

Press
to enter the lock setup interface as shown in the figure:
Note: The electric control is designed with four types of passwords, of which the functions are
defined as follows:
Administration password: Enabled in "Locking Setting" - "Use limit". Administration password
is the password with the highest privilege. You can change other passwords if you know the
administration password.
Mechanical parameter password: Enabled in " Locking Setting " - "Password Setting". Once the
mechanical parameter password is set up, it's impossible to enter the "Machine Param" setup interface
without entering the correct password.
User parameter password: Enabled in " Locking Setting " - " Password Setting ". Once the user
parameter password is set up, it's impossible to enter the "user parameter" setup interface without
entering the correct password.
Other passwords: Enabled in " Locking Setting " - " Password Setting ". The settings can be
key and enter the administration password in the assist operation interface
77