Mercedes-Benz E 320 1994 Owner's Manual page 59

Combination Switch
1 Low beam (with exterior lamp
switch turned to position m
2 High beam (with exterior lamp
switch turned to position m
3 High beam flasher (high beam
available independent of
exterior lamp switch position)
4 Turn signals, right
5 Turn signals, left
To operate the turn signals, move
the combination switch past the
point of resistance (up or down).
)
The switch is automatically
canceled when the steering wheel
>
is turned to a large enough
degree.
To signal minor directional
changes, such as changing lanes
on a highway, move combination
switch to the point of resistance
only and hold it there.
6 Control for
• windshield washer system
• headlamp cleaning system
7
(will work only with exterior
lan^ ^ vitch in position ET3
Canada only:
Also in position E l when the
engine is running)
When the washer system is
activated, the wiper also
operates for a limited time.
7 Windshield wiper control
P82 0073 B13
0 Wiper off
1 Intermittent wiping
II Normal wiper speed
III Fast wiper speed
Note:
The reservoir, hoses and nozzles
of the windshield washer and
headlamp cleaning systems are
automatically heated.