Mercedes-Benz E 320 1994 Owner's Manual page 112

Front seat head restraint
Head Restraints
Removing front seat head
restraints:
Bring the head restraint to its
highest position.
Depress release button (1) be­
neath the seatback covering
material and pull head restraint up
sharply, holding it by the left head
restraint post (viewed in driving
direction). Then pull out head
restraint completely with both
hands.
110
Rear seat head restraint
The release button (1) is located
below the left head restraint post
on both front seats.
Installing front seat head
restraints:
Insert the head restraint and push
it down to the stop.
Check if the highest position can
be reached by pushing the switch
up for approximately 5 seconds.
Adjust head restraint to the
desired position.
Removing rear seat head
restraints:
Pull the head restraint up to its
highest position. Depress the
release button (2) next to the left
head restraint post and pull out
the head restraint.
Installing rear seat head restraints:
Insert the head restraint, push it
down and adjust as desired. The
release button will automatically
return to its original position.
Warning!
For your protection, drive only
with properly positioned head
restraints.
Do not drive the vehicle with­
out the seat head restraints.
Head restraints are intended to
help reduce injuries during an
accident.
For positioning of head restraints
refer Head Restraints, Front and
Head Restraints, Rear in Index.