Table of Contents
Advertisement
Replacing bulbs:
When replacing halogen bulbs do
not touch glass portion of bulb
with bare hands. Use plain paper
or a clean cloth.
Warning!
Halogen lamps contain
pressurized gas. A bulb can
explode if you:
• touch or move it when hot,
•
drop the bulb,
•
scratch the bulb.
100
Bulb for high and low beam
(HB2 [60/55 W])
Bulb for fog lamp
(H3 [55 W])
Remove cover above headlamp.
Move retaining clamps (5) aside
and remove cover. Pull off electri
cal connector (8) respectively (10).
Unhook clamping ring and pull out
bulb together with clamping ring.
Remove bulb.
Insert new bulb (flat side facing
down), mount clamping ring.
Reinstall and push electrical
connector on securely. Reinstall
cover (6) and fasten with retaining
clamps (5).
Turn Signal, Parking, Side
Marker and Standing Lamp
(21/5 W / 32/3 cp bulb)
Replacing bulb:
Squeeze latch (4) together and lift
complete lamp assembly out to
front of vehicle. Twist bulb socket
(7) counterclockwise and pull out.
Push bulb into socket, turn
counterclockwise and remove.
Insert new bulb in socket push in
and twist clockwise. Reinstall bulb
socket. Reinstall lamp assembly
until properly seated and fasten
latch (4).
Hide quick links:
Advertisement
Chapters
Table of Contents
