Mercedes-Benz E 320 1994 Owner's Manual page 43

Adjust front seat belts so that the
shoulder portion of the belt is
located as close as possible to the
middle of the shoulder (it should
not touch the neck). For this pur­
pose, raise or lower the belt outlet
(3 positions). To lower the belt
outlet, press button (4).
The shoulder portion of the seat
belt must be pulled snug and
checked for snugness immediately
after engaging it and during
driving. Tighten the lap portion to
a snug fit by pulling shoulder
portion up.
Unfastening of Seat Belts
Push in the red button (3) in the
belt buckle (2).
Allow the retractor to completely
rewind the seat belt by guiding the
latch plate (1).
Operation:
The inertia reel stops the belt from
unwinding during sudden vehicle
stops or when quickly pulling on
the belt.
The locking function of the reel
may be checked by quickly pullinq
out the belt.
The emergency tensioning retrac­
tors tighten the fastened front seat
belts during frontal and front­
angled impacts exceeding the first
threshold of the SRS (see Index).
41