Mercedes-Benz E 320 1994 Owner's Manual page 53

Enlarging the cargo area:
The cargo area can be enlarged
by placing the seat cushions in a
vertical position and removing
them. To remove each seat
cushion, pull up the lever (4) on
the underside of the seat and pull
the seat cushion out of its hinges.
Folding the backrest forward:
When folding the backrest forward,
the hinge pins must rest in the
brackets at the backrest. It is not
necessary to remove the head re­
straints before folding the backrest
forward if the seat cushion has
been removed.
When reinstalling the seat
cushion, be sure to lock the
respective seat cushion into its
hinges.
In addition, when transporting
extremely long items, push front
passenger seat forward, remove
its head restraint and lower its
backrest to the rear.
Notes:
It must be ensured that the
heating elements of the rear
window defroster are not damaged
by cargo rubbing against them.
Warning!
In an accident, during hard
braking or sudden maneuvers,
loose items will be thrown
around inside the vehicle, and
can cause injury to vehicle
occupants unless the items
are securely fastened in the
vehicle.
Always lock backrest in its
upright position when rear
seat bench is occupied, or the
extended cargo area is not in
use. Check for secure locking
by pushing and pulling on the
backrest.
Never drive vehicle with trunk
lid open. Deadly carbon mon­
oxide (CO) gases may enter
vehicle interior resulting in
unconsciousness and death.
51