Parameter list
3.6.2
Displaying the extended parameters
1.
Screen at powering ON
The monitor display appears.
2.
Press
to choose the PU operation mode.
3.
Press
to choose the parameter setting
mode.
4.
Turn
until "
5.
Press
to read the currently set value.
"
" (initial value) appears.
6.
Turn
to change it to the set value "
7.
Press
to set.
After parameter setting is completed, press
the monitor display. To change settings of other parameters, perform the operation in above steps 3 to 6.
REMARKS
If the setting has not been changed, the value does not flicker and the next parameter number appears.
Pr. 160
9999
Only the simple mode parameters can be displayed.
(initial value)
0
Simple mode and extended mode parameters can be displayed.
74
Operation
" (Pr. 160) appears.
".
Turn
to read another parameter.
Press
to show the setting again.
Press
twice to show the next parameter.
Description
PU indication is lit.
PRM indication is lit.
(The parameter number read previously
appears.)
Flicker...parameter setting complete!!
once to show the fault history and press
Display
twice to return to