Mitsubishi 700 Series Instruction Manual page 32

(3) Safety stop function operation
Input signal
Input power
S1-SC S2-SC
OFF - - -- -
Short Short
Open Open
ON
Short Open
Open Short
∗1
ON: Transistor used for an open collector output is conducted.
OFF: Transistor used for an open collector output is not conducted.
For more details, refer to the Safety stop function instruction manual (BCN-A211508-000).
Output signal
Failure
SAFE
∗1
- - -- - - - - -- OFF
No failure OFF
Detected OFF
No failure
ON
(SA)
Detected OFF
Detected
OFF
(E.SAF)
Detected
OFF
(E.SAF)
Operation state
SAFE2
∗1
OFF Output shutoff (Safe state)
ON Drive enabled
OFF Output shutoff (Safe state)
ON Output shutoff (Safe state)
OFF Output shutoff (Safe state)
OFF Output shutoff (Safe state)
OFF Output shutoff (Safe state)
Wiring
2
23