Control With The Op3000 Control Panel; Op3000 Control Panel - DURKOPP ADLER 650-16 Operating Instructions Manual

Control with the OP3000 control panel

Operating Instructions 650-16 - 02.0 - 08/2016
5 Control with the OP3000 control panel
5.1

OP3000 control panel

Fig. 15: OP3000 control panel
All settings in the control for the 650-16 are performed using the
OP3000 control panel.
Key Function
0 to 16 Setting the fullness
Inputting the parameter value (if the field for the parameters
is activated)
Selection of a parameter that is shown in the display
• Press the key under the desired symbol.
The function is selected.
ESC Cancel the function
Exit the menu
OK Confirm the settings
Activate the input
P Function is different for each menu
S Function is different for each menu
F Function is different for each menu

Selection to the right

Selection to the left
Back one menu level

Increase the value
Scroll through the list (upwards)
37