Operation; Preparing The Machine For Operation; Switching On And Off The Machine - DURKOPP ADLER 650-16 Operating Instructions Manual

Operation

Operating Instructions 650-16 - 02.0 - 08/2016
4 Operation
4.1

Preparing the machine for operation

WARNING
Risk of injury from moving parts, cutting and
sharp parts!
Crushing, cutting and punctures are possible.
If possible, make preparations only when the
machine is switched off.
Complete the following steps in preparation of sewing before
starting to work:
• Changing the needle
• Threading the needle thread
• Threading the looper thread
• Adjusting the thread tension
4.2

Switching on and off the machine

Fig. 2: Switching on and off the machine
19