Settings Via The Software; Op3000 Control Panel - DURKOPP ADLER 878-M PREMIUM Operating Instructions Manual

Settings via the software

Operating Instructions 878-M PREMIUM - 02.0 - 02/2018
8 Settings via the software

8.1 OP3000 control panel

Fig. 46: Control panel
A
B
All settings in the controller for the 878-M PREMIUM are performed
using the OP3000 control panel.
Key Function
0 to 9 Inputting the parameter value (if the field for the parameters
is activated)
Selection of a parameter that is shown on the display
• Press the key under the desired symbol.

The function is selected.
ESC Cancel the function
Exit the menu (changes remain saved)
OK Confirm the settings
Activate the input
P Function is different for each menu
S Function is different for each menu
F Function is different for each menu

Selection to the right

Selection to the left
Back one menu level

Increase the value
Scroll through the list (upwards)

Decrease the value
Scroll through the list (downwards)
A Upper softkey
Assignment is different for each menu
71