Physical Description; Faceplate Leds; Power Consumption; Functional Description - Nortel Enterprise 1000 Reference Manual

Physical description

Faceplate LEDs

Table 50
Faceplate LEDs
State
On (Red)
On (Green)
Off

Power consumption

Functional description

Microprocessors

Succession Communication Server for Enterprise 1000 Circuit Card Reference Guide
NTAK93 D-channel handler interface daughterboard
NTAK09 1.5 Mb PRI and NTBK50 2.0 MB PRI cards
LEDs are located on the faceplate of the NTAK09 and NTBK50 cards. The
DCHI LED is dual-color (red and green). The LEDs are described in
Table 50.
Definition
NTAK93 is equipped and disabled.
NTAK93 is equipped and enabled, but not necessarily established.
NTAK93 is not equipped.
Power consumption is +5 V at 750 mA; +12 V at 5 mA; and –12 V at 5 mA.
The main functional blocks of the NTAK93 architecture include the
following.
One microprocessor does the following:
• handles data transfer between each pair of serial ports and software
• reports the status of each port
• takes commands from software to control the activities of the ports
The microprocessors also handle some D-channel data processing in DCHI
mode.
Page 183 of 236