AT&T Merlin 206 Manual page 18

4.
Program Intercom Auto Dial buttons for each Voice Terminal port used for Telephone Emulation.
Connect a 34 button display set to each Voice Terminal Ports used for Telephone Emulation.
Put the port into program mode by sliding the T/P switch to the P position.
Using the diagram on the page 19, program each Intercom Auto Dial button to match the template.
Note: This must be done or the Classic Mail will not function properly.
5.
Check all vacant Merlin Tel.Co. ports
Move an existing Public Network connection to a vacant Merlin Tel.Co. port.
Verify that the port is good by calling the telephone number for that line. If a working connection is made
the port is operational.
Repeat the previous steps for each vacant Tel.Co. port.
If all ports are good and have proceed with installation.
Note:
If any line port is not functioning, notify the Merlin system owner before proceeding with the
installation.
Classic Mail Installation Package - Page 18