AT&T Merlin 206 Manual page 14

1.
Check Voice Terminal Ports.
Plug a Merlin Voice Terminal (using a 34 Button Display Set is required) into ports to be used for "Telephone
Emulation" (TE).
When doing this check, use the Telephone Emulation Cable that will be connected to the Classic Mail to
verify that the cord is good. If the telephone does not work, replace the cord and repeat this check.
Verify that the ports are good. If the intercom light goes on and you get intercom dial tone when you lift the
handset the port is good.
If any voice terminal port is not functioning, notify the Merlin system owner before continuing with Classic Mail
installation.
Line key programming not possible. No pre-installation programming checks required.
Note:
2. Check all vacant Merlin Tel.Co. ports
Move an existing Public Network connection to a vacant Merlin Tel.Co. port.
Verify that the port is good by calling the telephone number for that line. If a working connection is made
the port is operational.
Repeat the previous steps for each vacant Tel.Co. port.
If all ports are good and have proceed with installation.
Note: If any line port is not functioning, notify the Merlin system owner before proceeding with the
installation.
Classic Mail Installation Package - Page 14
Merlin 206, 410 & 820 with Feature Module 1