Internet Mtu; Routing - Huawei EG860 Series User Manual

EG860
User Guide
Step 3 Click Set Up List and configure WLAN MAC List.
Access restrictions for
Fi equipment is changed, the previous filter rules become invalid. The related parameters are as
follows:
l Configure MAC as required.
l If For SSIDn is Enable, the
Step 4 Click Submit.
----End

7.2.7 Internet MTU

Set the maximum transmission unit (MTU) on an Internet port in Internet MTU.
Context
l
l
Procedure
Step 1 Choose General Settings > Internet MTU. The Internet MTU page is displayed.
Step 2 Configure the parameter in Internet MTU Settings.
Internet MTU: indicates the maximum length of the packets sent at an Internet port. The
parameter ranges from 576 bytes to 1500 bytes. The recommended value is 1440 bytes. An
MTU
Step 3 Click Submit.
----End

7.2.8 Routing

If routers are cascaded within a LAN, a static route is required to allow network access for
computers connected to the routers.
Context
Routers only work when connections are available.
Procedure
Step 1 Choose General Settings > Routing. The Routing page is displayed.
Step 2 Click Add Item to configure Static Routes.
Static routes function similarly with dynamic routes except that static routes are manually created
and always valid, and have higher priority than the dynamic routes.
Step 3 Click Submit.
----End
Issue 02 (2015-04-10)
Wi-Fi
A larger MTU presents a higher probability of Internet access failures.
A packet larger than the
larger than 1500 bytes needs to be divided, which reduces transmission efficiency.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
devices are based on MAC
MAC filter rules are valid for SSID.
MTU needs to be divided, which reduces transmission efficiency.
addresses. If the MAC
7 Reference
address of Wi-
87