Configuring The Uap2105 - Huawei UAP2105 User Manual

UAP2105
User Guide
About This Chapter
This describes how to configure the UAP2105 through the WebUI or the AP Manager.
5.1 Initial Configuration
This describes how to configure the IP address of the AP and the connection mode through an
ADSL modem or router according to the network topology of the AP.
5.2 Defining a Subscriber in the AHR
This describes how to define an AP subscriber in the AHR. To define an AP subscriber in the
AHR, create an AP zone, and then add an AP user to the zone.
5.3 Setting Parameters on the AP Manager
This describes how to set AP parameters on the AP Manager. The parameter settings are
applicable to all APs managed by the AP Manager.
Issue 03 (2009-08-20)
5

Configuring the UAP2105

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the UAP2105
5-1