Chapter 6 Options And Peripheral Equipment; Cable/Connector Sets - Mitsubishi Electric MR-J5 Series User Manual

6
OPTIONS AND PERIPHERAL EQUIPMENT
Precautions
• HIV wires are recommended to wire the servo amplifiers, options, and peripheral equipment. Therefore, the recommended
wire sizes may differ from those used for the previous servo amplifiers.
• To prevent an electric shock or a fire, correctly wire options and peripheral equipment, etc. in the correct combination.
6.1

Cable/connector sets

The IP rating indicated for cables and connectors is their protection against ingress of dust and water drops
when they are connected to a servo amplifier or servo motor. If the IP ratings of the cable, connector, servo
amplifier and servo motor vary, the overall IP rating depends on the lowest IP rating of all components.
Purchase the cable and connector options indicated in this section for this servo amplifier.
Refer to the following for options for servo motor power supply, electromagnetic brake, and encoder.
Rotary Servo Motor User's Manual (HK series)
Refer to the following for details of the options for linear encoders.
MR-J5 Partner's Encoder User's Manual
Refer to the following for options for direct drive motor power supply and encoder.
Direct Drive Motor User's Manual
6 OPTIONS AND PERIPHERAL EQUIPMENT
6.1 Cable/connector sets
6
129